40
Operation Modes
The FuzzyScan Fixed Mount Scanner has five different operation modes to meet various application
demands:
Trigger
,
Alternative
,
Level
,
Presentation
and
Force
modes.
If the scanner is set to
Trigger
,
Alternative
or
Level
mode, scans must be initiated by means of
external or serial trigger. Under
Presentation
or
Force
mode, readings are performed
automatically by the scanner, without trigger activation.
Trigger Mode
Under trigger mode, when the scanner receives a serial trigger ON command or if its external trigger
is activated, the scanner will turn on its light source and perform a scan. Once the external trigger is
deactivated, or a serial trigger OFF command is received, the scanner will turn off its light source and
stop scanning.
Trigger Mode
Alternative Mode
When the scanner receives a serial trigger ON command or if its extrernal trigger is activated, the
scanner will turn on its light source and perform a scan. The light source will remain on until the
defined
scan input time-out
duration has elapsed. The
scan input time-out
duration is reset
after each scan. While the light source is on, the scanner will automatically read barcodes without
the need to activate its external trigger or send a serial trigger ON command.
Alternative Mode
Level Mode
When the scanner receives an external trigger or a serial trigger ON command under level mode, the
scanner turns on the light source to read barcodes until a good read is performed or the preset
scan
input time-out
duration is up.
Level Mode
( FA480, FA470, FA460 )
Level Mode
( FM480 )
Summary of Contents for FuzzyScan FA460
