©
IMPEX INC. www.marcypro.com
16
CARE, MAINTENANCE AND STORAGE
1. Inspect and tighten all parts each time you use the bike. Replace any worn parts
immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use
solvents.
3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.
4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such
as furniture to provide safe access to and passage around the bike.
5. To avoid possible injury, the help of two or more people are needed when moving the bike
around.
6. Disposal Instructions – The equipment can be safely disassembled and disposed without
unreasonable hazards. Call your local recycle agency regarding details of recycling.
7.
The maximum user weight is 300 lbs.
8.
Assembled Dimension: 45” x 20” x 45.5”
OPERATING NOTES
ADJUSTMENT
1. Use the Tension/Brake Knob (#10) to adjust the resistance for exercises.
2. The seat height adjustment is in approximately 1.5” increment.
*The seat height can be adjusted for multiple heights; ranging from 35” to 41”.
3. Loosen and pull out the Lock Knob (#16). Slide the Seat Support Frame/ Handle Bar
support to the desired height and lock at the position by fastening the Lock Knob
4. Loosen and pull out the seat Lock Knob (#5). Slide the Seat Support to the desired
position and lock at the position by fastening the seat Lock Knob.
Stopping the Exercise
1. Press down the Tension/Brake Knob (#10) to stop the fly wheel. ONLY when
the flywheel has stopped, will it be safe to remove feet from pedals.
2. DO NOT stop pedaling: doing so could result in serious injury.
3. DO NOT attempt to stop the Fly Wheel by hands, feet or any other device not
indicated in this instruction.
TRANSPORT
The Bike has a pair Roller Wheels on Front Stabilizer.
To move, carefully tilt the cycle forward, and then roll.
