Circuit Specialists Station 75, Instruction Manual

General Specifications
______________________________________________________________________

Model: Station 75
Power consumption: …................... 75 Watts
VAC Input:....................................... 110/120VAC for units shipped from the USA
                 …..................................   220/240VAC for units shipped from the U.K.
Output Voltage to Soldering Wand:  24V AC
Temperature Range:........................ 200 °C to 480 °C / 392 °F to 896 °F
Cord assembly................................. 3 ft.
Heating element............................... ceramic

General Instructions:
_______________________________________________________

1: Plug the soldering iron into the front panel of the main body
2: Plug in the AC cord to a grounded wall outlet
3: Turn on the power switch
4: Set the temperature by rotating the front panel dial. Temperature is printed for Celsius                  

or Fahrenheit

5:The heater lamp will blink on and off. When the desired temperature has been reached, 

the blinking will stop, The unit is now ready to perform soldering.