– 17 –
b) 15 Amp Fast acting 6.3x32mm Ceramic Fuse (by a professional
person only)
➔
Turn off the meter and disconnect
both test leads.
➔
Remove the three screws at the back
of the case (one at the top and two at
the bottom).
➔
Remove the single screw securing
the battery/fuse cover and lift to
open.
➔
Remove the batteries.
➔
Carefully lift the top of the case away
from the bottom.
CAUTION:
Lift the top case
carefully - do not break the
wires attached to the battery
compartment.
➔
Gently lift the battery compart-
ment and move it through the
hole on the inner side of the meter.
➔
The 15 amp fuse is the larger
fuse on the bottom of the PC board,
which should now be in full view. Carefully remove the old fuse and
replace it with a new CSA/UL listed fast acting ceramic 15A/250V fuse
only.
