- 7 -
Specifications
Enclosure
Double molded, waterproof
Shock (Drop Test)
6.5 feet (2 meters)
Diode Test
Test current of 0.3mA maximum, open circuit
voltage 1.5V DC typical
Continuity Check
Audible signal will sound if the resistance is less
than 100Ω (approx.), test current <0.3mA
Temperature Sensor
Requires type K thermocouple
Input Impedance
7.8MΩ
AC Response
True RMS
ACV Bandwidth
40Hz to 400Hz
Crest Factor
≤3 at full scale up to 500V, decreasing linearly to
≤1.5 at 1000V
Display
4,000 count LCD with backlit
Over range indication
“
OL
” is displayed
Auto Power Off
30 minutes (approximately) with disable feature
Polarity
Automatic (no indication for positive); Minus (-)
sign for negative
Measurement Rate
2 times per second, nominal
Low Battery Indication
“ ” is displayed if battery voltage drops below
operating voltage
Battery
One 9 volt (NEDA 1604) battery
Fuses
mA, μA ranges; 0.5A/1000V ceramic fast blow,
6.32 x 32mm A range; 10A/1000V ceramic fast
blow, 10 x 38mm
Operating Temperature
41°F to 104°F (5°C to 40°C)
Storage Temperature
-4°F to 140°F (-20°C to 60°C)
Operating Humidity
Max 80% up to 87°F (31°C) decreasing linearly
to 50% at 104°F (40°C)
Storage Humidity
<80%
Operating Altitude
7000ft. (2000meters) maximum.
