INSTALLATION
Page 14 of 36
2.3.2.
AC
I
NPUT
A three-way power connector is used to connect AC Power Live, Neutral and Earth.
The unit is configured for either 220VAC or 110VAC depending on option ordered. The
module will be labelled with specified AC supply voltage level. Refer to the technical
specifications section in this document.
Live
Earth
Neutral
Figure 2.11
–
AC Power Connector
The unit is protected from AC supply disturbances by a replaceable 1A fuse as well
as a MOV.
The unit’s AC rated supply voltage should be confirmed from the label as a well as by
confirming the supply jumper configuration.
Figure 2.12
–
AC Power - Jumper Configuration
NOTE: Ensure that the correct voltage is applied to the unit.
Connecting the incorrect voltage to the unit will cause damage and
ould result in personal injury.