background image

airREPEATER 

 

 

Instructions manual 

 

 

 

 

 

 

 

 

Pag 3 of 9 

Safety Warnings & Symbols  

DANGER 

 

Death, serious injury, or fire hazard could result from improper connection of this equipment. 
Read and understand this manual before connecting the equipment. Follow all installation and 
operating instructions while using the instrument.  
Installation, operation, and maintenance of this instrument must be performed by qualified 
personnel only.  The National Electrical Code defines a qualified person as “one who has the 
skills and knowledge related to the construction and operation of the electrical equipment and 
installations, and who has received safety training on the hazards involved.”  
Use always the required personal protective equipment 

 

WARNING 

 

Read the instructions manual before using the equipment. 
 
If the instructions preceded by this symbol are not met or applied correctly, this can cause 
personal injury or equipment and / or facilities damage. 

Liability limitations 

 
CIRCUTOR, SA reserves the right to make changes, without previous notice, to devices or 
specifications of equipment shown in this manual.  
 
The term of the CIRCUTOR guarantee is two years from the date of purchase and is limited to refund of 
the purchase price, repair free of charge, or replacement of defective equipment that is returned to 
CIRCUTOR post-sales service within the term of the guarantee. 
 
The latest versions of specifications and the most up to date manuals of this equipment are available to 
CIRCUTOR, SA  customers on its web site:  www.circutor.com.  

Recommendations prior to use 

 

 

In order to use the equipment safely, it is critical that individuals who handle it, follow 
the safety measures set out in the standards of the country where it is being used, use 
the necessary personal protection equipment, and pay attention to the various 
warnings set forth in this instruction manual. 

 
Before handling, modifying the connection or replacing the equipment, the power supply must be 
switched off, and the equipment  disconnected.  
 
It is important to use only the connection cables and accessories that are delivered along with the 
equipment . These products are specially designed for use with this apparatus and comply with current 
safety standards. Also, it is critical to keep the cables in perfect condition in order to avoid accidents, 
personal injury and damage to installations. 
 
The manufacturer of the equipment is not responsible for any damages resulting from failure by the 
user or installer to heed the warnings and/or recommendations set out in this manual, nor for damages 
resulting from the use of non-original products or accessories or those made by other manufactures. 
 
We recommend using only the original material delivered with the equipment in order to ensure the 
safety of individuals who handle it and the integrity of the equipment itself. 
 
Inspect the work area before install. Do not use the device in dangerous areas or where there is a risk 
of explosion. Avoid using the device in wet areas. 

 

 

Summary of Contents for airREPEATER










Reviews: