43
Instruction Manual
COMPACT DC
5.7.- METERS MENU: TOPOLOGY LOG
With the
topology log
and the
test cycles
enabled, you can get an overview of the functioning
of the PRIME network.
The
topology log
is used to determine the availability of the different energy meters over a time
period.
Unlike the
test cycles
, the
topology log
just checks whether a device is connected without
carrying out different communications with the energy meter. Therefore it is less intrusive and
can be performed in parallel with the normal operations of the concentrator.
From this screen,
Figure 43,
you can view and configure the parameters necessary to log the
network topology.
Figure 43:Topology log�
On this screen you can configure the following parameters:
TopologyLog:
Topology log enabled or disabled.
NameTopology:
Name of the file.
IpFtpTopology:
IP address of the server for downloading the topology log.
DestDirTopology:
Path of the server for downloading the topology log.
UserFtpTopology:
Username of the server for downloading the topology log.
PwdFtpTopology:
Password of the server for downloading the topology log.
MaxLinesTopology:
Maximum number of lines.
TimeWaitTopology:
Maximum wait time, in seconds.
