59
Instruction Manual
COMPACT DC
Tasks are actions that the
COMPACT DC
performs on a given date and time, or periodically,
whether associated with the energy meters connected on the PRIME network or related to
COMPACT DC
reports.
You can configure all the
COMPACT DC
tasks on the screen shown in
Figure 64
.
The upper section of the
Tasks
screen shows a list of all the
COMPACT DC
tasks. The
Task
settings
table appears when you click on one of the tasks, with the configuration of the select
-
ed task. The parameters for this table are:
Identifier
: Task identification number.
Start time
: Task start date.
Priority:
Indicates the priority assigned to the task in the event of a collision:
1:
Maximum priority
2:
Normal priority
3:
Low priority
Fill gaps:
Yes
,
means that the logs missing from the device that were not in the previous files will
be completed.
No
, means that only information about the request date will be sent
FTP Destination:
FTP where the reports that have been run will be uploaded.
Meter list:
Devices on which the task will be performed. If this field is empty, the query will be
performed on all the devices detected on the network.
It is not necessary to fill in this field for concentrator-related queries.
Interval time:
In this section you program the repetition period for the task. If the frequency is
"0", the task will only be executed once.
In the
Task processes list
section you can program:
The task to be executed is selected in the
Request
column.
Send:
Select whether the file will be sent to the FTP server (Yes) or (No).
Store:
Indicates whether the data will or will not be stored in the internal
COMPACT DC
data-
base after the reports are searched
Attributes:
Specific parameters for event logs (
S09
and
S17
) that enable filtering the types of
events to be downloaded.
The buttons:
X
, deletes the selected task.
Add
, adds a new task or process.
Accept
, stores the modified task temporarily.
Once all the tasks are configured, click on the
Send
button to save the tasks to the
COMPACT
DC
.
