6
PV-Monitor-M
Instruction Manual
1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- Installation guide.
If any problem is noticed upon reception, immediately contact the transport
company and/or
CIRCUTOR's
after-sales service.
2�- INTRODUCTION
The
PV-Monitor-M
is an energy manager that has been designed to monitor instantaneous
self-consumption photovoltaic energy installations (with or without injection into the grid). It
features a datalogger and web server with PowerStudio Embedded and a SCADA application
for this purpose.
This device provides real-time information about the installation performance,
photovoltaic
energy production levels, the consumption of a building, home, office, etc., as well as storing
historical data to perform periodic analyses.
The
SCADA
electric energy management application can provide real-time information about
the photovoltaic energy production levels, electricity savings and the load consumption of elec-
tricity of a building, home, office, etc. It receives the internal variables of a
CDP-0
and does not
depend on the configuration of the photovoltaic energy plant (installed power, inverter device,
single or three-phase network and measuring points).
The device features:
- An
Ethernet
Port.
- Indicator
LEDs
.
-Display with two 20-character rows.
- 4 keys
-
RS-485
Communications.
