36
RECmax-CVM
Instruction Manual
5�2�2�- CIRCUIT BREAKER TRIP
Press the
PROG
key to move between the different screens�
Table 18: Display screens: Circuit breaker trip�
Display screens: Circuit breaker trip
td
mA
I n
REC
Delay and Sensitivity
REC
N
No� of trips
which have occurred due to circuit breaker�
REC
N
Total no� of trips
Access to the electrical parameters display screen�
Long press (> 3s) the
PROG
key to access the electrical parameters screens (
ELECTRICAL PARAMETERS DISPLAY SCREENS”
)
�
Screen to access the communications settings parameters display�
Hold down the
PROG
key (> 3s) to access the screens displaying the RS-485
communications settings parameters
5.1.2.- COMMUNICATIONS SETTINGS PARAMETERS
)�
5�2�3�- TRIPPING WITH THE TEST KEY
When tripping the device by pressing the
TEST
key, the device will display the normal operating status
, but instead of displaying the
leakage current
, it will display the screen in
REC
Figure 28: Trip due to TEST�