12
RECmax Lpd
Instruction Manual
3�5�- DISCONNECTION OF THE DEVICE
If after wiring the
RECmax Lpd
you decide to have the protected line disconnected, you must dis-
connect the device manually by pushing the contact lever of the switch downwards and moving the
mechanical lock (yellow sealable catch
) upwards. This eliminates any possibility of accidental
reclosing
Figure 5: Mechanical lock�
Never
manually lower the circuit breaker without previously enabling the mechanical
lock (moving the yellow sealable catch,
upwards). This prevents accidental
reclosing while handling the installation. On doing this, although the green LED is not
on, the unit remains connected to the upstream auxiliary power supply and therefore
precautions should be taken to avoid touching parts with voltage.
