Cirris Systems | Installing Easy-Wire Software 1
The CR Tester
Introduction
Use this guide to install the easy-wire software, setup the hardware, connect the CR tester to a network,
and get the overview of the test system.
Parts List
Each CR order comes with the following parts:
Add-On Scanner Parts List
A CR add-on scanner system is optional and includes the following parts:
If you need assistance at any time, call your Cirris Customer Support representative. In the U.S.A. Cirris
Sales and Customer Support may be reached at 1-800-441-9910.
Booster Cable(s)
One per Booster Scanner.
Caution!
Improper
installation of this cable
may damage your
equipment!
CR Tester
Base Scanner
One required per
system.
Provides 256 points.
USB Cable
easy-wire install CD
Wrist Strap
Hand Held Probe
Terminators
Two per Base
Scanner
Add-On Scanner(s)
Up to seven can
connect to a Base
Scanner or Booster
Scanner.
Extra Power Supplies
One required for each
Booster Scanner.
Extra Terminator(s)
One per Booster
Scanner.
Power Supply
Booster Scanner(s)
Provides power for
every seven Add-On
Scanners after the first
seven.
CR Tester
Add-on Cable(s)
One for every
add-on scanner.
IEC Power Cord
Varies according to
the country of
receipt.
