S
ECTION
8: H
ANDLING
AND
S
ERVICING
C
IRRUS
D
ESIGN
S
ERVICING
SR20
8-20
P/N 11934-005
multiple flashes separated by 1-second periods, will begin to display
after approximately 1 second.
4.
Flash Codes displayed with the associated conditions are as follows:
a
1-Flash: Indicates that the system is operational and that no error
conditions were found.
b
2-Flashes: Not used. If displayed, correct condition before further
flight.
c
3-Flashes: Not used. If displayed, correct condition before further
flight.
d
4-Flashes: Indicates low output power. If displayed, correct condi-
tion before further flight.
e
5-Flashes: Indicates no position data present. If displayed, correct
condition before further flight.
• N
OTE
•
BAT1 must be powered on to provide position data to the ELT.
f
6-Flashes: Indicates G-switch loop is not present. If displayed,
correct condition before further flight.
g
7-Flashes: Battery check. If displayed, correct condition before
further flight.
h
8-Flashes: Indicates programming data missing. If displayed,
correct condition before further flight.
Reissue A