background image

Warranty Information

In North America 

Your Cirrus 3CFM computer radio system is warranted against manufacturer defects in materials and workmanship 
for a period of 90 days from the date of purchase. Warranty service will be provided within 90 days of the date of 
purchase only if you are able to provide the original or a copy of the original dated sales receipt.

In the United Kingdom/Europe 

Your Cirrus 3CFM computer radio system is warranted against manufacturer defects in materials and workmanship 
for a period of 1 (one) year from the date of purchase. Warranty service will be provided within 1 (one) year of the 
date of purchase only if you are able to provide the original or a copy of the original dated sales receipt. This does 
not affect your statutory rights.

Cirrus is not responsible for the unauthorised modification, adjustment and/or replacement of parts of this product. 

Neither is Cirrus responsible for the use of this product.

Important Warranty Service Information 

Before returning your Cirrus 3CFM computer radio system for warranty consideration, please re-read this instruction 
manual to be sure that you are operating this radio control system correctly. Please also note that the status of the 
system must be within the Warranty Service Information as detailed below. Please do not return your Cirrus 3CFM 
computer radio system to the place of purchase. They are neither authorised nor equipped to perform warranty 
work on Cirrus products. When requesting warranty service, please observe the following:

•   Crash damage will not be covered under warranty, nor will a dropped transmitter be covered. Do not request 

warranty service for crash-damaged or dropped product.

•   Always return the whole system; transmitter, receiver, switch and battery box (if supplied). Include details all 

of the items that you are returning. Always remove all batteries from the system before returning it.

•   Include a note detailing the problem or service you are requesting. Service cannot be provided without this 

information. Please include a daytime telephone number, your home address and an email address that you 
can be reached at in case we need more details pertaining to the service requested.

•   If your system is out of its warranty period you may request an estimate of services at the time you return it 

for service. An omission of this request implies permission for Global Services / Ripmax Ltd. to service your 
system at our discretion.

•   Please include a method of payment for any service charges.

•   Send the system to us by United Parcel Service, Federal Express or Insured Mail. Return postage is non-

refundable. Send your package to:

IN NORTH AMERICA: 

Global Services  

18480 Bandilier Circle  

Fountain Valley, CA 92708  

Phone: (714) 963-0329  

Fax: (714) 964-6236  

Email: service@globalhobby.net 

IN EUROPE: 

Ripmax Ltd.  

241 Green Street  

Enfield, EN3 7SJ, U.K. 

 

Phone: +44(0) 20 8282 7500 

 

Fax: +44(0) 20 8282 7501 

 

Email: xtm@ripmax.com 

All contents copyright circa 2007, Version 1 June 2007

15

Summary of Contents for 3CFM
















Reviews: