CL-GE300
Rev.900-580-31-00
8.2.
Example 2:
Multiple Cameras/Switching Cameras
RJ
-
4
5
12
p
in
Camera 1
MONO
8 bit
CL- GE 300
CL
1
IN
CL2
IN
CL
3
IN
GigE
Trigger IN 0
Camera 2
MONO
8 bit
Camera 3
MONO
8 bit
Trigger IN 1
Trigger IN 2
Trigger IN0
Trigger IN1
Trigger IN2
Camera 1 OUT
Camera 2 OUT
Camera 3 OUT
Camera 1 OUT
Camera 2 OUT
Camera 3 OUT
GigE OUT
(Camera side: MONO 8bit output, Trigger input: Trigger IN 0, IN 1, IN 2 input)
Recommended
cameras
:
VCC-G21PCL series, VCC-G22/F22PCL series, VCC-G32/F32PCL(RAW mode) series
Conditions :
・
Select RAW output cameras when using color cameras.
RGB output cameras shall not be connected.
・
Cameras with same pixels and same frame rate shall be selected.
・
Signal output will be switched as soon as CL-GE300 receives the command to
switch (address 004). (Output channel will be switched even when the images
are in the middle of outputting.)
Camera settings
Address Data
Remarks
Camera side
Set the camera to trigger mode.
(Refer to the Specifications, address settings for the details.)
CL-GE300 side
001
000
CL1 IN
－
Trigger IN 0
，
CL2 IN
－
Trigger IN 1
，
CL3 IN
－
Trigger IN 2
002 000 8bit
003 000 MONO
004
000
～
002 Output channel switching
©2009 CIS Corporation. All rights reserved.
11
