CL-GE300
Rev.900-580-31-00
z
The voltage ripple of camera power DC +12V
±
10% shall be within
±
50mV. Improper power
supply voltage may cause noises on the video signals.
z
The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please avoid
noises like chattering when rising.
10
40
20
30
50
10
11
12
[V]
Voltage Rising Time [ ms]
9
8
7
60
70
Power
Sup
ply
Volta
ge
In case of abnormal operation, contact the distributor from whom you purchased the product.
3. Product Outline
CL-GE300 is a multiplexer module, which converts camera link input into Gigabit Ethernet output.
With synchronizing cameras, up to 3 cameras can be connected to CL-GE300. (Cameras shall be the
same resolution.) PoCL cameras and PoCL camera link cables must be used.
Key Features
□
100MB/s image data can be transmitted at blazing speed via Ethernet.
□
Image data can be remote transferred 100m at category 5e level.
□
Maximum 3 same resolution cameras can be connected to CL-GE300 with synchronizing them.
□
Minimize system architecture adapting PoCL. (Power over Camera Link.)
□
iPORT SDK 2.2.2.0 build 113 (SP3) can be downloaded from our home page.
©2009 CIS Corporation. All rights reserved.
4
