DCC-HD3
Rev. 905-0118-00
©2017 CIS Corporation. All rights reserved.
5
(15)
Shutter Speed Variable
Range
MANUAL: 1/13600s
～
1/25s
*Shutter speed slower than 1/60s will be limited by the frame rate corresponding to the video
output format.
AUTO: 1/13600s
～
1/25s (Upper limit and lower limit can be set.)
*Same as MANUAL, shutter speed slower than 1/60s will be limited by the frame rate
corresponding to the video output format.
(16)
White Balance Adjustment
Range
AUTO, AUTO (Outdoor), ATW, 7 different Preset, MANUAL, User Preset 1~5, and One Push
Preset:
Daylight (5500K), Cloudy (6500K), Shade (8000K), Tungsten (3200K), Fluorescent (White),
Fluorescent (Neutral White), Fluorescent (Daylight)
(17)
AE Photometric System
Average/Center-Weighted/Spot/Backlight Compensation
(18)
Flicker Cancel
ON,OFF(typ.)
*Valid when 60fps,59.94fps,30fps,29.97fps
(19)
Edge Enhancement
OFF, 1~7 (typ. 3)
(20)
Color Correction
Standard, Fluorescent Light, Tungsten Lamp
(21)
Color Saturation Adjustment
0% (B/W)~100% (typ.)~200%
(22)
Color Compression
OFF, 1~7 (typ. 5)
(23)
Noise Reduction
ON, OFF
(24)
Contrast / D range
Contrast-2, Contrast-1, Standard, C1, C2, D-range Extension
(25)
Master Pedestal
-100 ~ 0 ~ +100
(26)
Pedestal (R, G, B)
RGB: -100 ~ 0 (typ.) ~ +100 each
(27)
Color Balance
RGB: 50 ~ 100 (typ.) ~ 150 each
(28)
Pixel Defect (White spot)
Correction
Corrected at factory setting.
(29)
LTC
OFF, ON. The external SMPTE Time code can be input to LTC IN terminal (internal self-running
time code is resettable).
(30)
Preset (Camera settings)
1, 2, 3, and 4 (4 presets can be set.)
(31)
DC IRIS output
Auto/Open Selectable. Can be used with electric shutter (With priority to electric shutter).
(32)
Remote Control Operation The camera can be controlled via RS-232C communications with φ3.5 plug (4poles). Camera
settings can be controlled by control software via PC. With connecting to the optional remote
controller, camera settings can be set on OSD (On Screen Display).
(33)
Safety/Quality standards
UL: Conform to UL Standard including materials and others.
RoHS: Conform to RoHS
CE and FCC are acquired as VCC-HD3 (chassis typed camera).
(34)
Durability
Vibration Acceleration
98m/s
2
(10G)
Frequency
20
～
200 Hz
Direction
X,Y, and Z, 3 directions
Testing time
120min for each direction
Shock
No malfunction shall be occurred with 980m/s
2
(100G) for ±X,±Y, and ±Z,
6 directions.
(35)
Operation environment
Performance
guaranteed
0 ~
+ 40℃
Humidity
20 ~ 80%RH
with no condensation
Operation
guaranteed
-5 ~ +45
℃
Humidity
20 ~ 80%RH
with no condensation
※Perform ance
guaranteed: All the specifications specified in this manual is guaranteed under
performance guaranteed temperature.
※Operation
guaranteed: All the camera functions operate normally under operation guaranteed
temperature.
(36)
Storage Environment
Storage Temperature: -25 ~
+ 60℃,
Humidity: 20 ~ 80%RH with no condensation.
(*1) Applied when embedded in VCC-HD3, chassis typed camera.
