DCC-HD3
Rev. 905-0118-00
©2017 CIS Corporation. All rights reserved.
6
<3G-SDI output Level A and Level B>
A difference between Level A and Level B is a way of mapping Y signal and Cb/Cr signal onto 3G-SDI standard signal. The
difference does not affect the resolution of the video signal. Some 3G-SDI receivers correspond to either Level A or B,
whereas other receivers correspond to both Levels, so please set the camera mode to match your 3G-SDI receiver.
5.
Parts Name and Functions
1.
Sensor board (BI-HD3)
OLPF and a filter case are attached to the sensor board.
Protect the OLPF from dusts.
It has the same serial number as the one on the main board
2.
Main board (MB-HD2X)
On-board FPGA and CPU are mainly on this board.
It has the same serial number as the one on the sensor board.
3.
Driver board (PD-HD1X)
On-board 3G-SDI, HD-SDI drive, and power circuit are mainly on this board.
It has the same serial number as the one on the sensor board.
4.
FPC cables (51 pins)
FPC cables which connect each boards.
Boards are connected at the time of delivery.
The sensor board and the main board should be paired up because the correction data of the sensor is saved
in the main board.
5.
Power connector (6 pins)
This connector is for power input (DC+12V), external sync, and LTC signal input..
Use the bundled 6pins cable to connect.
6.
3G-SDI/HD-SDI output connector (BNC)
This connector is for 3G-SDI/HD-SDI video-out signals.
Connect to a 3G-SDI/HD-SDI monitor and others using a BNC cable.
7.
DC IRIS LENS connector (4 pins)
This connector is for DC IRIS LENS signals.
Use the bundled 4pins cable to connect to the DC IRIS LENS. No connection is needed when DC IRIS is not
in use.
8.
RS-232C I/F jack. (
φ
3.5mm 4pins)
This jack is for RS-232C signals.
Use a 4 pins plug of your own to connect to the RS-232C signals. (Please be noted no 4 pins plug is bundled.)
With connecting to the optional remote controller, OSD (On Screen Display) operation will be enabled.
B
I-
H
D1
X
B
o
a
rd
MB-HD1 X Board
PD- HD1X Board
O
LP
F
Filter Ca se
CN 2
CN 1
CN 4
CN 5
1
2
3
4
6
5
7
CN 1
CN 1
CN 2
CN 3
8
