VCC-5CL1R
Rev. 905-0022-02
©2015 CIS Corporation. All rights reserved.
3
1.
Scope of Application
This is to describe VCC-5CL1R, 1-inch type CMOS, 5.2M resolution, Camera Link Color (RAW) Camera.
All specifications contained herein are subject to change without prior notice. Reproduction in whole or in part is
prohibited.
2.
Handling Precautions
The camera must not be used for any nuclear equipments or aerospace equipments with which mechanical failure
or malfunction could result in serious bodily injury or loss of human life. Our warranty does not apply to
damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
z
Do not use
or store
the camera in the extremely dusty or humid places.
z
Do not apply excessive force or static electricity that could damage the camera.
z
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera
is not in use, put the lens cap on.
z
Follow the instructions in Chapter 6, “External connector pin assignment” for connecting the camera.
Improper connection may cause damages not only to the camera but also to the connected devices.
z
Confirm the mutual ground potential carefully before connecting the camera to monitors or
computers. Any AC leaks from the connected devices may cause damages or destroy the camera.
z
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power
supply voltage may cause damages or malfunction of the camera.
z
The voltage ripple of camera power DC +12V
±
10% shall be within
±
50mV. Improper power
supply voltage may cause noises on the video signals.
z
The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please
avoid noises like chattering when rising.
10
40
20
30
50
10
11
12
[V]
Voltage Rising Time [ ms]
9
8
7
60
70
Pow
er
S
uppl
y
Volt
ag
e
