VCC-5CL4MHS
Rev.905-0079-01
©2017 CIS Corporation. All rights reserved.
24
Please be noted the below and always check the status whenever you change the image indication size.
「
Notes for coordinate indication
」
X coordinate and Y coordinate shown is the one for the current image. When vertical partial (SU50, 54),
horizontal flip (SU11), or vertical flip (SU12) is changed, the coordinates to be indicated shall be changed
accordingly.
The lists shown by parameters 3 and 4 are only the registered data in the currently shown image area.
(When indication image size was reduced, some registered data by the user could be out of area. In
such case, the coordinate points out of the indication area would not be shown.)
To show the coordinate points of out of the area, execute parameter 1 or parameter 2. These points
would be shown as minus coordinate or as the one of the out of image size.
