VCC-F60U29GE
Rev.900-682-30-00
©2008 CIS Corporation. All rights reserved.
4
z
The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please
avoide noises like chattering when rising.
10
40
20
30
50
10
11
12
[V]
Voltage Rising Time [ ms]
9
8
7
60
70
Pow
er
S
uppl
y
Volt
ag
e
In case of abnormal operation, contact the distributor from whom you purchased the product.
3. Product Outline
VCC-F60U29GE is a Gigabit Ethernet interfaced, high-resolution industrial color video camera module utilizing
a 1/1.8 inch PS IT CCD. 2M pixels CCD image sensor with on-chip micro-lenses realizes high sensitivity and
high resolution. At RAW mode setting, entire pixels can be read out within approx. 1/27s. At RGB mode
setting, entire pixels can be read out within approx. 1/13s.
Features
□
High speed communication, maximum 108MB/s. (Comform to 1000BASE-T)
□
The maximum transmission distance is approx. 100m with cable more than CAT5e.
□
Camera settings can be set via LAN.
□
Software trigger input via LAN or hardware trigger input via 12pin connector at rear is selectable.
□
Shutter speed can be set from 1/27sec
～
1/45,000sec by 1H at RAW mode,
and
1/13sec
～
1/22,000sec by 1H at RGB mode.
□
At partial scan mode, both capturing start position and capturing width can be set by 3H.
Bundled Items
□
Camera
□
iPORT Software Development Kit 2.4.1 build 921.
※
□
Gig-E Camera Control Software (CamCtlSetup.exe)
※
□
Start up manual
※
Please ask for the details or download it from our web.
