14
INSTALLING THE PAIR OF DOOR STATUS CONTACTS
1.
Place the door side door status device in position, making sure the red cable C2R is
at the top (Fig. 1).
2.
Place the frame side door status device in position, making sure the letter P
(positive pole) is at the top (Fig. 1).
3.
By turning the adjusting screw, adapt the position of the door status device to the
clearance between the door leaf and the frame (Fig. 2).
N.B.: the door and frame must not touch as the contacts connect magnetically.
4.
The door status device can be positioned as shown in Fig. 3.
0÷5 mm
N° 4 Ø 3
P
C2R
51
61
16.5
Fig. 1
Fig. 2
Fig. 3