Rainbow Colors
The appliance is attempting to connect to Meraki Cloud Controller
Flashing White
Firmware upgrade in progress
Solid White
Fully operational/connected, uplink actively using wired WAN
Back Panel
GX50 Back Panel Functions
Additional functions on the back panel are described below, from left to right.
USB port
Powered USB for charging devices.
WAN / Internet port
This port provides connectivity to/from the Internet.
LAN ports
These 4 ports provide connectivity to computers, printers, access points, or
Ethernet switches.
A steady green LED indicates bidirectional connectivity, and flashing green
indicates traffic.
Power input
Designed for use only with the unit’s power supply.
Reset button
Insert a paper clip if a reset is required.
Press for 1 second to delete a downloaded configuration and reboot.
Press and hold for more than 10 seconds to force a full factory reset.
Bottom Panel
2
