10-15
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 10 Overhead Accounting
Related Documentation
0 packets, 0 bytes
30 second rate 0 bps
Queueing
queue limit 8 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 200000, bc 800, be 800
target shape rate 200000
Overhead Accounting Enabled
Related Documentation
This section lists additional Cisco documentation for the features discussed in this chapter. When
appropriate, paths to applicable sections are listed below the documentation title.
Feature
Related Documentation
ATM overhead accounting
Traffic Shaping Overhead Accounting for ATM, Release 12.2(31)SB2
feature
module
Class-based shaping
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.3
Part 4: Policing and Shaping > Configuring class-Based Shaping
Class maps
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
Part 8: Modular Quality of Service Command-Line Interface > Configuring
the Modular Quality of Service Command-Line Interface > Modular QoS CLI
Configuration Task List > Creating a Traffic Class
Percentage-based traffic shaping
QoS: Percentage-Based Shaping, Release 12.2(31)SB2
feature module
Policing
Comparing Traffic Shaping and Traffic Policing for Bandwidth Limiting
Policy maps
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
Part 8: Modular Quality of Service Command-Line Interface > Configuring
the Modular Quality of Service Command-Line Interface > Modular QoS CLI
Configuration Task List > Creating a Traffic Policy
QoS service policies
QoS Configuration and Monitoring, Creating Time-of-Day QoS Service Policies
Tech Note
QoS Configuration and Monitoring, Monitoring Voice over IP Quality of Service
Tech Note
Site-to-Site MPLS VPN Solution for Service Providers, Service Provider
Quality-of-Service Overview
Tech Note
Traffic shaping
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.3
Part 4: Policing and Shaping
MLP on LNS
Cisco 10000 Series Router Software Configuration Guide
Chapter 19: Configuring Multilink Point-to-Point Protocol Connections