1-35
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
MLP Over Frame Relay-Based LFI Feature
Cisco IOS Release:
Release 12.2(28)SB
Description:
The MLP over Frame Relay-based LFI feature was introduced on the PRE2 to allow you
to fragment and interleave real-time and nonreal-time packets on Frame Relay interfaces and DLCIs.
Cisco IOS Release:
Release 12.2(31)SB2
Description:
This feature was introduced on the PRE3.
MLP Over Serial-Based LFI Feature
Cisco IOS Release:
Release 12.0(23)SX
Description:
The MLP over serial-based LFI feature was introduced on the PRE1 to allow you to
fragment and interleave real-time and nonreal-time packets on serial links.
Cisco IOS Release:
Release 12.2
Description:
This feature was introduced on the PRE2.
Cisco IOS Release:
Release 12.2(28)SB
Description:
This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release:
Release 12.2(31)SB2
Description:
This feature was introduced on the PRE3 and the valid interface values changed from 1 to
9999 (Release 12.2(28)SB and later) to from 1 to 9999 and 65,536 to 2,147,483,647
(Release 12.2(31)SB2 and later).
FRF.12 Fragmentation Feature
Cisco IOS Release:
Release 12.0(23)SX
Description:
The PVC-based FRF.12 Fragmentation feature was introduced on the PRE1.
Cisco IOS Release:
Release 12.0(27)S
Description:
This feature was enhanced to allow interface-based FRF.12 fragmentation.
Cisco IOS Release:
Release 12.2
Description:
This feature was introduced on the PRE2 to allow PVC-based and interface-based FRF.12
fragmentation.
Cisco IOS Release:
Release 12.2(28)SB
Description:
This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release:
Release 12.2(31)SB2
Description:
This feature was introduced on the PRE3.
