Index
IN-7
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
class maps
12
Frame Relay bundles
36, 39, 42
map classes for Frame Relay
1
policy maps
19
CS1 through CS7
6
D
data, policing rate
23
data-link connection identifier
allocating PVC bandwidth share
2
assigning
19
description of
17, 16
VoIP packet classification
4
IP RTP Priority
5
See also
DLCI.
DBS,
See
dynamic bandwidth selection.
dbs enable command
12
DE bit
6
default class
bandwidth-remaining command
6
default traffic class
11
delay, managing
7
differentiated services
assured forwarding
assured forwarding, class drop probability
7
assured forwarding classes
7
best effort, DSCP 0
6
class selector code points
6, 7
compliance with IETF standards
6
DiffServ suggested DSCP values
8
DSCP
6
expedited forwarding, per-hop behavior
7
matching criteria
7
per-hop behavior
6
recommended values
21
reserved keywords
7
RFCs defining DSCP values
8
setting DSCP bits
12
weighted random early detection based on DSCP
9
differentiated services code point
assured forwarding
binary values
8
bits
6
code point values
7
DSCP
names
8
values
8
expedited forwarding
RFCs, defining DSCPs
8
discard-class
marking traffic
16, 33
setting
12
discard eligibility bit
6
displaying, statistics and configuration information for
policing
41
DLCI
assigning
16
associating map classes to
16
DotP marking, in nested hierarchical policies
8
dropping packets
based on CLP
31
drop policing action
12, 3
drop probability, assured forwarding classes
7
drop rate in random-detect command
8
how RED determines drop probability
10
interfaces not supporting drop policies
22
interfaces supporting drop policies
21
random early detection
9
verifying packet dropping
32
weighted random early detection
9, 11
drop profiles
for WRED
17
drop rate, random-detect command
9
DS3/E3 line card, maximum virtual circuits supported
8
DSCP,
See
differentiated services.
DSCP-based mapping for PVC bundles
40
dscp command (Frame Relay VC-bundle-member)
34