1-50
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 1 Quality of Service Overview
QoS Features, Commands, and Changes
Cisco IOS Release:
Release 12.3(7)XI1
Description:
This feature was modified on the PRE2 to provide strict priority queuing. To specify a
bandwidth rate for a strict priority queue, you must specify the
police
command.
Cisco IOS Release:
Release 12.2(28)SB
Description:
This feature was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release:
Release 12.2(31)SB2
Description:
This command was introduced on the PRE3.
PVC Bundles
Documentation Reference:
Chapter 19, “Configuring Quality of Service for PVC Bundles”
•
bump Command, page 1-50
•
bump Command (Frame Relay VC-bundle-member), page 1-51
•
bundle Command, page 1-51
•
class-bundle Command, page 1-51
•
class-vc Command, page 1-51
•
dscp Command (Frame Relay VC-bundle-member), page 1-51
•
exp Command, page 1-51
•
frame-relay vc-bundle Command, page 1-51
•
mpls experimental Command, page 1-52
•
oam-bundle Command, page 1-52
•
precedence Command, page 1-52
•
precedence Command (Frame Relay VC-bundle-member), page 1-52
•
protect Command, page 1-52
•
protect Command (Frame Relay VC-bundle-member), page 1-52
•
pvc-bundle Command, page 1-53
•
pvc Command (Frame Relay VC-bundle), page 1-53
•
PVC Bundles Over ATM and Frame Relay Feature, page 1-53
•
ATM PVC Bundle Enhancement—MPLS EXP-Based PVC Selection Feature, page 1-53
•
Frame Relay PVC Bundles with QoS Support for IP and MPLS Feature, page 1-53
bump Command
Cisco IOS Release:
Release 12.0(26)S
Description:
The bump command was introduced on the PRE1 to configure the bumping rules for an
ATM PVC bundle or a specific ATM PVC bundle member.
