The unit must not be mounted with the output ports facing downwards. You must mount the unit with the
cables going sideways.
Note
Figure 6: Mounting on the Wall
Key-hole slots
1
To attach to a wall stud, each bracket requires one number-10 wood screws (round- or pan-head) with
number-10 washers, or two number-10 washer-head screws. The screws must be long enough to penetrate
at least 1.5 inches (38.1 mm) into the supporting wood or metal wall stud.
Note
For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and washers
must be size number 10. Route the cables so that they do not put a strain on the connectors or mounting
hardware.
Note
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
26
Installing and Connecting the Router
Installing the Router