Attaching DIN Rail Brackets
Step 1: Attach the brackets to the router chassis as shown in the figure below, using the PHMS screws and
the plastic spacers provided for each bracket.
Figure 8: DIN Rail Bracket Installation
Screws
1
DIN Rail Brackets
2
Do not over-torque the screws. The recommended torque is 8 to 10 inch-lbf (.9 to 1.1 N-m).
Note
Your chassis installation must allow unrestricted airflow for chassis cooling.
Note
Step 2: Attach the router to the wall using the key-hole slots.
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
28
Installing and Connecting the Router
Installing the Router