Uninstalling the Cisco Microsoft Windows Vista USB Driver
This procedure shows you how to uninstall the Microsoft Windows Vista USB driver.
Disconnect the router console terminal before uninstalling the driver.
Note
Step 1
Run the setup.exe for Windows 32-bit or setup(x64).exe for Windows-64bit. Click Next.
Step 2
The InstallShield Wizard for Cisco Virtual Com appears. Click Next.
Step 3
When the Program Maintenance window appears, select the Remove radio button. Click Next.
Step 4
When the Remove the Program window appears, click Remove.
If a User Account Control warning appears, click
“
Allow - I trust this program...
”
to proceed.
Note
Step 5
When the InstallShield Wizard Completed window appears click Finish.
Connecting WAN and LAN Interfaces
This section describes how to connect WAN and LAN interface cables. It covers the following topics:
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1001
Warning
Class 1 laser product. Statement 1008
Warning
Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or
ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach
the end away from the unit first. Statement 1026
Warning
To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety,
connect Gigabit Ethernet ports using RJ-45 connectors for shielded twisted pair cable only to intra-building
or unexposed wiring or cable. The intra-building cable must be shielded and the shield must be grounded
at both ends. The intra-building port(s) of the equipment or subassembly must not be metallically connected
to interfaces that connect to the OSP or its wiring. These interfaces are designed for use as intra-building
interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation
from the exposed OSP cabling. The addition of Primary Protectors is not sufficient protection in order to
connect these interfaces metallically to OSP wiring.
Caution
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
38
Installing and Connecting the Router
Connecting WAN and LAN Interfaces