R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
3G Wireless WAN Interface Cards
Connecting an Antenna with the 3G Wireless WAN HWIC
14
OL-12853-01
Figure 131
shows the various antenna options with the 3G wireless WAN HWIC.
Figure 131
Antenna Options
Connecting Swivel-Mount Dipole Antennas
If you are using Cisco swivel-mounted dipole antennas, follow these steps:
Step 1
Attach an antenna to each TNC antenna connectors on the front of the 3G wireless HWIC and tighten it
hand-tight.
Step 2
Orient the antennas, depending on how you intend to mount the router in which the 3G wireless HWIC
is installed.
•
If the router is on a table or desk, orient the antennas to the left and right sides so that they are at a
90-degree angle to each other. (See
Figure 131
.)
•
If the router is on a vertical surface, such as a wall, orient the antennas up and at a 90-degree angle
to each other.
•
If the router is on a ceiling, orient the antennas down and at a 90-degree angle to each other.
Note
Although it is not absolutely necessary, for best RF performance, do not attach the dipole antenna
directly to the face-plate of the 3G wireless HWIC. Use the antenna extension cable and antenna base
recommended for the product.