1-16
Cisco 1900 Series Hardware Installation
OL-19084-02
Chapter 1 Overview of the Router
Specifications
Safety compliance
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950-1
IEC 60950-1
For detailed compliance information, see
Regulatory Compliance
and Safety Information for Cisco 1900 Series Routers
.
Telecom
TIA/EIA/IS-968
CS-03
ANSI T1.101
IEEE 802.3
RTTE Directive
For detailed compliance information, see
Regulatory Compliance
and Safety Information for Cisco 1900 Series Routers
.
1.
Refer to the
Cisco 1900 Series Integrated Services Routers Data Sheet
for additional information.
2.
Rack unit (RU
3.
480 Mb/s individually, bandwidth is shared when both are used.
4.
Auto-MDIX=auto media-dependent interface cross over.
Table 1-7
Cisco 1905 and 1921 Series Router Specifications
1
Description
Specification
Table 1-8
Cisco 1940 Series Router Specifications
1
Description
Specification
Physical
Dimensions without rubber feet
(H x W x D)
3.5 x 13.5 x 11.5 in. (8.9 x 34.3 x 29.2 cm), 2 RU
2
height
Rack-mount 19 in. (48.3 cm)
EIA
Included
Weight (no modules installed)
Approximately 12 lbs
Weight with PoE
12.8 lbs
Maximum Weight-Fully
Configured
14.0 lbs
Power
AC input power
•
Input voltage
100 to 240 VAC, autoranging
•
Frequency
47 to 63 Hz
•
Input current (max)
1.5 to 0.6 A
•
Typical power (no modules) 35 W
•
Power (max) with AC
110 W
•
Power (max) with PoE
(platform only)
110 W
