T
UTORIAL
:
G
ETTING TO
K
NOW YOUR
C
ISCO
D
IGITAL
M
EDIA
E
NCODER
2000
Click the
Submit button
at the bottom of the page.
The page will refresh, and you will be prompted to reboot the Cisco Digital Media Encoder 2000.
Your changes will not take effect until the system is restarted.
Click the
Reboot Now link
to restart the system and apply the
Computer Name
change.
While the Cisco Digital Media Encoder 2000 is restarting, the following message will appear in the
Web Interface
.
NOTE:
The restart process takes approximately two minutes to complete.
When the Cisco Digital Media Encoder 2000 has restarted, you will be returned to the
Login screen
.
NOTE:
If you close your Web browser and later want to log into the
SCX Web Interface
, you will
need to use the new computer name you created to access the Cisco Digital Media Encoder 2000.
Cisco Digital Media Encoder 2000 Properties
The
Properties section
has two fields:
User Name
and
Serial Number
. Only the
User Name field
allows modification, which changes the
User Password
from the factory default.
Changing the Login Password from the Factory Default
Click the
admin link
in the
User Name field
. You will be presented with a new screen, which allows
you to change your login password for the
SCX Web Interface
.
NOTE:
You cannot change the
User Name
for the
SCX Web Interface
.
Type in your current password in the
Password field
, and then type in the new password in both the
New Password
and
Confirm New Password fields
.
Cisco Digital Media Encoder 2000 User Guide
61
Summary of Contents for 2000
Page 1: ...Cisco Digital Media Encoder 2000 User Guide October 2007 ...
Page 6: ......
Page 127: ...NIAGARA SCX WEB INTERFACE Cisco Digital Media Encoder 2000 User Guide 115 ...
Page 145: ......
