Procedure
Step 1
In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile
Configuration window using
Device
>
Device Settings
>
Common Phone Profile
.
Step 2
Enter a password in the Local Phone Unlock Password option.
Step 3
Apply the password to the common phone profile that the phone uses.
Value Input Guidelines
When you edit the value of an option setting, follow these guidelines:
•
Use the keys on the keypad to enter numbers and letters.
•
To enter letters by using the keypad, use a corresponding number key. Press the key one or more times
to display a particular letter. For example, press the
2
key once for
a
, twice quickly for
b
, and three times
quickly for
c
. After you pause, the cursor automatically advances to allow you to enter the next letter.
•
To enter a period (for example, in an IP address), press
*
on the keypad.
•
Press the up arrow on the navigation bar to move the cursor to the left most character, and press the
down arrow on the navigation bar to move the cursor to the right most character.
•
Press
Hold/Resume
if you make a mistake. This button deletes the character to the left of the cursor.
•
Press
Back
before pressing
Select
to discard any changes that you have made.
•
The edited values will take effect after you go back to the parent menu and confirm to save the changes.
Related Topics
Display Configuration Menu, on page 35
Password Protection, on page 36
Network Setup Menu, on page 37
Network Setup Menu
The Network Setup menu provides options for viewing and making a variety of network settings. The following
table describes these options and, where applicable, explains how to change them.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
37
Cisco Unified IP Phone Settings
Value Input Guidelines
