23
and you can go now to the
Setting Up Centralized Ma
.
Otherwise, if you are
not
satisfied, do the following:
a.
From the HDMI Display Autodetection list,
select
Disable
.
b.
From the Display Standard list, select the standard that
applies in your country. For example, even though our
factory default selection is NTSC_M, your country
might use
PAL
instead.
c.
From the Display Output Interface list, select the
connector type and signal type that you are using. For
example, you might use
SVIDEO
.
If you do not know which options to select, see the
manufacturer documentation for your DMP display.
Step 2
From the Color Space list, select the absolute color space
that your DMP display uses.
Step 3
If you selected RGB as the color space, select an option
from the Color Component Order list to define the order
in which to store red, green, and blue data. This definition
is sometimes called the left-to-right additive color model.
Step 4
(
Optional
) Move any or all of the sliders to compensate
for DMP display deficiencies in video (brightness,
contrast, or saturation) or audio (channel volume).
Step 5
To confirm your selections and to implement them until
you change them or until you restart your DMP,
click
Apply
.
Summary of Contents for 4400G
Page 31: ...31 ...
