Models
The Cisco 5100 ENCS is available in these models:
Description
Product ID
This device has 64 GB storage capacity.
ENCS5104-64/K9
This device has 200 GB storage capacity.
ENCS5104-200/K9
This device has 400 GB storage capacity.
ENCS5104-400/K9
With the exception of M.2 drive and memory, other hardware features are common across all models.
Note
In the Cisco 5100 Enterprise Network Compute System, when the hardware units (for example, BIOS) are
implemented separately, the compliance labels for each of them are different leading to label mismatch. To
avoid the confusion, you must use the compliance label as the master for the 74 TAN.
Note
SFP Modules
This section provides information on Cisco Small Form-Factor Pluggable (SFP) Modules in Cisco ENCS
5100. The switch Gigabit Ethernet SFP and SFP+ modules provide copper or optical connections to other
devices. These modules are hot-swappable and provide the uplink interfaces. The SFP modules have fiber-optic
LC connectors or RJ-45 copper connectors.
Use only supported SFP modules on the switch. Each module has an internal serial EEPROM that is encoded
with security information.
If non-supported SFP is plugged into the system, you need to reboot the system after removing the
non-supported SFP for other SFPs to work normally.
Note
Class 1 laser product. Statement 1008
Warning
The Cisco ENCS 5100 supports the following SFP modules:
Description
Part Number
Cisco 1000BASE-LX/LH SFP module for MMF
and
SMF, 1300-nm wavelength, commercial operating
temperature range.
GLC-LH-SMD
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
7
Overview of the Cisco 5100 Enterprise Network Compute System
Models