2-11
PIX 515E Security Appliance Getting Started Guide
78-17645-01
Chapter 2 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
You can add these addresses to the same IP pool that contains the address
pool used by the DMZ interface (in this scenario, the Pool ID is 200).
e.
Click the
Port Address Translation (PAT) using the IP address of the
interface
radio button.
If you select the option Port Address Translation using the IP address of the
interface, all traffic initiated from the inside network exits the security
appliance using the IP address of the outside interface. To the devices on the
Internet, it appears that all traffic is coming from this one IP address.
f.
Click the
Add
button to add this new address to the IP pool.
g.
Click
OK
.
