C H A P T E R
3-1
Cisco AS5400 Universal Gateway Chassis Installation Guide
OL-2847-02 0A
3
Installing the Cisco AS5400 and
Cisco AS5400HPX Universal Gateways
This chapter guides you through the installation of the Cisco AS5400 and Cisco AS5400HPX universal
gateways and includes the following sections:
•
Setting Up the Chassis, page 3-2
•
Connecting to the Network, page 3-5
•
Connecting the Console Terminal and Modem, page 3-9
•
Connecting to the BITS Port, page 3-11
•
Connecting to the Alarm Port, page 3-12
•
Supplying Power, page 3-13
•
Where to Go Next, page 3-16
Note
Unless specifically noted, all references to the Cisco AS5400 also apply to the
Cisco AS5400HPX.
Warning
Only trained and qualified personnel should be allowed to install or replace this
equipment. To see translations of the warnings that appear in the publication, refer to the
Regulatory Compliance and Safety Information
document that accompanied this device.
To see translations of the warnings that appear in the publication, refer to the Regulatory
Compliance and Safety Information document that accompanied this device.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth
ground during normal use. To see translations of the warnings that appear in the
publication, refer to the
Regulatory Compliance and Safety Information
document that
accompanied this device.
Warning
Incorrect connection of this or connected equipment to the general purpose outlet could
result in a hazardous situation. To see translations of the warnings that appear in the
publication, refer to the
Regulatory Compliance and Safety Information
document that
accompanied this device.
