3-9
Cisco AS5400 Universal Gateway Chassis Installation Guide
OL-2847-02 0A
Chapter 3 Installing the Cisco AS5400 and Cisco AS5400HPX Universal Gateways
Connecting the Console Terminal and Modem
•
Use a serial transition cable to connect one of the two synchronous serial ports to a modem or a
CSU/DSU. (See
Figure 3-9
.)
Figure 3-9
Connecting to a CSU/DSU
Note
For cable and port pinouts for specific dial feature cards, refer to
Appendix C,
“Cabling Specifications”
in the
Cisco AS5350 and Cisco AS5400 Universal
Gateway Card Installation Guide.
Connecting the Console Terminal and Modem
Use the console terminal for local administrative access to the universal gateway. You can only connect
a terminal to the console port. You can use the auxiliary port to connect a terminal or a modem for remote
access.
Connecting to the Console Port
To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console
port, follow these steps:
Step 1
Connect the terminal using an RJ-45 rollover cable and an RJ-45-to-DB-25 or RJ-45-to-DB-9 adapter.
The adapters provided are labeled TERMINAL. Other types of adapters are not included. (See
Figure 3-10
.)
30846
Serial
transition
cable
CSU/DSU or
other DCE or DTE
Synchronous serial
port (DB-26)
EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,
EIA/TIA-530, V.35, or X.21 connector
Internet
