Chapter 2 Installing the SN 5428 Storage Router
Verifying Installation
2-28
Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01
Verify That Network Connections Are Operational
Verifying the network connections consists of making sure that the following
ports are operational: Gigabit Ethernet, 10/100 Ethernet management, and 10/100
HA.
To verify that the network connections are operational, perform the following
steps:
Step 1
Verify the Gigabit Ethernet port connections by checking the port link status
LED. See
Table 1-1 on page 1-6
for LED indication descriptions.
Step 2
Verify the 10/100 Ethernet management port connection by checking the port link
status LED. See
Table 1-1 on page 1-6
for LED indication descriptions.
Step 3
Verify the 10/100 HA port connection by checking the port link status LED. See
Table 1-1 on page 1-6
for LED indication descriptions.
Step 4
If any of these conditions are not met, reference
Chapter 3, “Troubleshooting,”
to
isolate and, if possible, resolve the problem.
Verify That Fibre Channel Connections Are Operational
To verify that the connections are operational, perform the following steps:
Step 1
Verify Fibre Channel port connections by checking Fibre Channel LOG LEDs.
See
Table 1-1 on page 1-6
for LED indication descriptions.
Step 2
If the LOG LEDs for connected ports are flashing, reference
Chapter 3,
“Troubleshooting,”
to isolate and, if possible, resolve the problem.
