3-18
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
OL-12920-01
Chapter 3 Installing the ASA 5580
Installing the FIPS Enclosure
Step 11
Install the front panel inside the front surround panel and secure it with the nine screws you removed in
Step 5. See
Figure 19
.
Figure 19
Installing the Front Panel to the Front Surround Panel
Installing the Rear Shield Assembly
To install the rear shield assembly, perform the following steps:
Step 1
Position the rear shield assembly on the rear of the chassis and align the rear shield panel holes with the
holes on the rear of the chassis.
Step 2
Secure the shield into place using the screws provided in the kit. See
Figure 20
.
Figure 20
Install the Rear Shield on the Rear of the Chassis
279248
279251