Cisco 6015, Installation And Replacement Notes

15

Standards and Certifications

OL-2186-01

Standards and Certifications

Step 8

Use a flat-head screwdriver to screw in the Champ connectors and tie wrap the connector to the chassis,
as shown in

Figure 6

.

Figure 6

Attaching the Champ Connector the Chassis

Step 9

Plug the AC power cord into the wall outlet or reinsert the fuses in the fuse and alarm panel.

Step 10

Set the circuit breaker on the DC PEM to the ON (1) position.

Standards and Certifications

The DSL interface module has the same standards as the Cisco 6015 system, as shown in

Table 3

.

1

Champ connector screw

3

Champ connector

2

Tie wrap

48039

2

3

1

Table 3

Regulatory Compliance for Cisco 6015 Hardware

Area of
Compliance

Compliance Standard

Product Safety

UL 1950, 3rd Edition, EN 60950, AS/NZS 3260, IEC 950,
FCC Part 15, Class B

Emissions

CISPR22, EN55022, AS/ANS 3548, ICES-003, VCCI, BSMI (CNS 13438)

Immunity

EN61000-4-2, 3, 4, 5 and 6 / IEC-61000-4-2, 3, 4, 5 and 6;
EN61000-4-11 / IEC-61000-4-11

NEBS

Bellcore GR-63-CORE, GR-1089-CORE, SR-3590 Level 3

Telecom

FCC Part 68, CS-03, ACA TS 016: 1997, CTR 12 97/520/EC
Amendment 1 1997 (TBR 12), JATE GREEN BOOK 1997

ETSI

300-386-1, 300-386-2, 300-019