1-11
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware
Modem Requirements for Cisco Unified MeetingPlace Systems
Figure 1-3
Cisco Unified MeetingPlace Digital Connection Requirements—E1
Modem Requirements for Cisco Unified MeetingPlace Systems
The Cisco Unified MeetingPlace 8100 series includes an external modem that connects to the Cisco
Unified MeetingPlace system through a serial cable. Connect the modem cable from the back of the
Cisco Unified MeetingPlace 8100 series to the CPU transition module.
Confirm that you can call the modem extension from the outside so that Cisco TAC can access the Cisco
Unified MeetingPlace system.
Table 1-7
lists modem requirements by country for a Cisco Unified MeetingPlace system.
E1 Euro ISDN
Network
interface unit
(NIU)
Special 23 ft cable
shipped with unit
T1 Smart Blade
PBX
E1 Euro ISDN
QSIG
Cisco Unified MeetingPlace
Audio Server system
PSTN
153999
Customer-supplied
RJ-45 connectors
Channel
service unit
(CSU)
(optional)
Table 1-7
Modem Requirements by Country
Country
Requirements
U.S.
Canada
Hong Kong
•
U.S. modem supplied by Cisco Systems.
•
Serial cable.
•
6-foot modem cable.
•
Customer-supplied standard analog phone jack (RJ-11). You must be able
to call the extension from the outside.
