1-12
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware
LAN Requirements for Cisco Unified MeetingPlace Systems
LAN Requirements for Cisco Unified MeetingPlace Systems
To connect to other applications, such as MeetingTime and Cisco Unified MeetingPlace Web
Conferencing, Cisco Unified MeetingPlace Audio Server systems require certain TCP and User
Datagram Protocol (UDP) ports to remain open on your network.
Figure 1-4
illustrates the ports that a Cisco Unified MeetingPlace system uses for communication.
Unless otherwise specified, all ports listed are TCP.
Figure 1-4
TCP/UDP Port Requirements
Ensure that the Cisco Unified MeetingPlace Audio Server system resides on a network segment that is
free from potential network problems, such as storms, loops, and collisions.
Japan
•
CE modem supplied by Cisco Systems.
•
Serial cable.
•
8.2-foot modem cable.
•
Customer-supplied standard analog phone jack (RJ-11). You must be able
to call the extension from the outside.
European Union
•
Global modem supplied by Cisco Systems.
•
Serial cable.
•
Customer-supplied standard analog phone jack (RJ-11). You must be able
to call the extension from the outside.
Table 1-7
Modem Requirements by Country (continued)
Country
Requirements
Cisco Unified MeetingPlace
Audio Server system
154000
End user
scheduling via web,
Microsoft Outlook,
or IBM Lotus Notes
End user in a
web conference
Microsoft Windows NT
system with
Cisco Unified MeetingPlace
integration applications
UDP 123
Network
time protocol
server
5001, 5005
5001, 5003, 5005
80
System manager
using MeetingTime
80 or 443(SSL) and 1627
1503 (NetMeeting)
