2-6
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Mounting the Cisco Unified MeetingPlace 8100 Series
Figure 2-3
Mounting the Cisco Unified MeetingPlace 8106 in an EIA Equipment Rack
Mounting the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA
Equipment Rack
In a 19- or 23-inch EIA equipment rack, you mount the Cisco Unified MeetingPlace 8112 on the front
rails.
To Mount the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA Equipment Rack
Step 1
If you are installing the Cisco Unified MeetingPlace 8112 in a 19-inch rack, you do not need any
additional mounting equipment. Skip to
Step 2
.
If you are installing the Cisco Unified MeetingPlace 8112 in a 23-inch rack, you must obtain extension
brackets from the rack manufacturer. Install the optional extender brackets as described by the rack
manufacturer.
Step 2
Slide the Cisco Unified MeetingPlace 8112 into the front of the rack.
Step 3
Attach the Cisco Unified MeetingPlace 8112 to the rack with the eight Phillips-head screws that shipped
with the Cisco Unified MeetingPlace 8112. See
Figure 2-4
.
