2-8
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Mounting the Cisco Unified MeetingPlace 8100 Series
To Mount the Breakout Box for a T1 PRI or E1 Cisco Unified MeetingPlace System
Step 1
Locate the breakout box that shipped with the Cisco Unified MeetingPlace Audio Server.
Step 2
Locate the screws for mounting the breakout box that came with the Cisco Unified MeetingPlace Audio
Server.
Step 3
Use a screwdriver to mount the breakout box in the position directly above the Cisco Unified
MeetingPlace Audio Server in the rack, as shown in the applicable figure:
Step 4
If applicable, mount the second breakout box by repeating
Step 2
and
Step 3
. Place the second breakout
box directly above the first breakout box. See
Figure 2-7
.
Figure 2-5
Mounting the Breakout Box for a Cisco Unified MeetingPlace 8106
Cisco Unified MeetingPlace 8106
See
Figure 2-5
.
Cisco Unified MeetingPlace 8112
See
Figure 2-6
.
