Step 3
(Optional) In the
Programmable Softkeys
section, to enable softkeys, add a string in this format in the
Connected Key List
and
Conferencing Key List
fields.
crdstart;crdstop;crdpause;crdresume
Step 4
In the phone web page, click the
Ext(n)
tab that requires call recording.
Step 5
In the
SIP Settings
section, in the
Call Recording Protocol
, select
SIPINFO
as the call recording protocol.
For details on
SIP Settings
fields, see
Step 6
Click
Submit All Changes
.
Configure Missed Call Indication with the Configuration Utility
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 80
Procedure
Step 1
Select
Voice
>
User
.
The user can select
User Login
>
Voice
>
User
.
Step 2
Click
Submit All Changes
.
Enable Do Not Disturb
You can allow persons to turn the Do not disturb feature on or off. The caller receives a message that the
person is unavailable. A person can press the
Ignore
softkey on the phone to divert an incoming call to another
destination.
If the feature is enabled for the phone, users can turn the feature on or off with the DND softkey.
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 80
Procedure
Step 1
Choose
Voice
>
User
.
Step 2
In the
Supplementary Services
area, select
Yes
in the
DND Setting
drop-down list.
Step 3
Click
Submit All Changes
.
When you select a line (multiline phone), a Do Not Disturb banner displays at the top of the phone screen.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
133
Cisco IP Phone Administration
Configure Missed Call Indication with the Configuration Utility
