• ext2= the second extension being dialed or the star code action to perform
• nme2= name of the second action to perform
The
name
field displays on the softkey on the IP phone screen. We recommend a maximum of 10
characters for a phone. If more characters are used, the label might be truncated on the phone screen.
Note
Step 4
Edit the following:
•
Idle Key List:
Edit the field to add psk1|1 to the beginning of the string; for example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
•
PSK1:
fnc=sd;ext=*72@$PROXY;nme=CFOn;ext2=*73@$PROXY;nme2= CFOff;
In this example, a PSK is configured to toggle between turning call forwarding on and off using the
“call forwarding on” star code (*72) and the “call forwarding off” star code (*73).
Note
You can also configure an XML service on the programmable soft key. Enter the string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 5
Click
Submit All Changes
.
Configure Speed Dial on a Programmable Softkey
You can configure programmable softkeys as speed dials. The speed dials can be extensions or phone numbers.
You can also configure programmable softkeys with speed dials that perform an action that a vertical service
activation code (or a star [*] code) defines. For example, if you configure a programmable softkey with a
speed dial for *67, the call is placed on hold.
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 80
Procedure
Step 1
Select
Voice
>
Phone
.
Step 2
In the
Programmable Softkeys
section, set the
Programmable Softkey Enable
to
Yes
.
Step 3
To configure a speed dial PSK, enter the following in the PSK
number
field:
fnc=sd;ext=extensionname/starcode@$PROXY;vid=n;nme=name
Where:
• fnc= function of the key (speed dial)
• extensionname=extension being dialed or the star code action to perform
• vid= n is the extension that the speed dial will dial out
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
173
Cisco IP Phone Administration
Configure Speed Dial on a Programmable Softkey
