Configure Provisioning Authority in the Phone Configuration File
You can enable provisioning authority in the default configuration file for your phones, so that you don't need
to set up the feature manually for each phone.
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page 80
Procedure
Step 1
In the phone configuration file, set the following parameters:
a) Set the Provisioning Authority profile rules in the
Profile_Rule
parameters.
Example:
<Profile_Rule ua="na">("$EMS" eq "mobile" and "$MUID" ne "" and "$MPWD" ne "")?[--uid
$MUID$PDOM --pwd $MPWD]
http://10.74.121.51:80/dms/CP-8851-3PCC/8851System.xml|http://10.74.121.51:80/dms/CP-8851-3PCC/8851System.xml</Profile_Rule>
b) Set the
EM_Enable
parameter to
Yes
.
Example:
<EM_Enable ua="na">Yes</EM_Enable>
c) Enter the enter the domain for the phone, or the authentication server in the
EM_User_Domain
parameter.
Example:
<EM_User_Domain ua="na">@10.74.121.51</EM_User_Domain>
Step 2
Save the configuration file and upload it to your provisioning server.
Step 3
Select
Voice
>
Provisioning
.
Step 4
Enter the filepath to the configuration file in one of the
Profile Rule
fields.
Example:
http://<SERVER IP ADDRESS>:80/dms/td_8861/8861System.xml
Step 5
Click
Submit All Changes
.
Enable Hoteling on a Phone
Set up the hotel feature on Broadworks and set the phone as a host or a guest.
Procedure
Step 1
Select
Voice
>
Ext [n]
(where [n] is the extension number).
Step 2
In the
Call Feature Settings
section, set
Enable Broadsoft Hoteling
to
Yes
.
Step 3
Set the amount of time (in seconds) that the user can be signed in as a guest on the phone in
Hoteling
Subscription Expires
.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
179
Cisco IP Phone Administration
Configure Provisioning Authority in the Phone Configuration File
